Loading...

1997 - 2002 4L60E Rebuild Kit Complete High Performance 600 HP

Stock Number: 4l60e-97-02-complete-rebuild-kit


Call - New Special Price

In stock

This kit is for 1997 1998 1999 2000 2001 2002 4L60E transmissions only. Here's is what you get:
Fairbanks oversize billet intermediate servo
Fairbanks oversize billet overdrive servo
Sonnax oversize .490 pressure valve
10 vane pump rotor and vane kit
Pump seal retainer
Pump bushing
Borg Warner 29 element forward sprag
new low / reverse roller clutch
Alto carbon fiber Power Band
Complete thrust washer kit
Alto master rebuild kit with all Clutches and Steels molded pistons (97 up on pistons)
Master kit comes with all gaskets, seals and rings.
Filter
Beast shell
3 new accumulator pistons
Transgo separator plate
See Pictures

We have designed this kit to be complete for a easy rebuild. This kit when installed properly will have a parts rating of about 575 to 625 Horse Power.

Red Eagle Friction Information

Alto Red Eagle Clutches Steels Frictions for Performance Transmissions

Clutches fail in High-Performance applications due to excessive heat. Our specially designed original Red Eagle clutches withstand higher temperatures than any other clutch available. Our original material is designed to limit the amount of slip by providing a shorter lock-up time, generating less heat.

Our proprietary process starts with the friction paper saturated in a phenolic resin, cured, and then saturated a second time in a silicate. The silicate imparts high heat resistance.

Red Eagle clutches:
Are designed with a softer, more resilient base paper.
Assure less wear against opposing steel plates.
Reduce the incidence of steel plates burning and warping.

The original Red Eagle clutches increased surface area provides:
Increased surface area for increased holding
Increased surface area for increased heat absorption
Increased surface area for shorter lock-up time - decreasing slippage
Red Eagle clutches are also designed to dissipate oil without the necessity of an oil groove.

Kolene Steel

Kolene® is a salt bath nitriding process. In generic terms, it is a thermochemical diffusion process, whereby ferrous parts are processed in molten salt with a specific nitrogen potential. In plain English, it provides a surface treatment that enhances wear and fatigue resistance from 200% to 500%.

Kolene plates offer higher heat resistant and increased lubricity.

Kolene is a registered trademark of Kolene Corporation.

TrueCar - Don't Miss Out 300x250

Red Eagle® High Performance

Red EagleAlto is the recognized leader in High-Performance Friction material. We are the original manufacturer of Red Eagle® friction materials. Our clutches have been used in Hi-Performance applications for over 20 years.

Alto manufactures a wide range of High-Performance friction materials, Kolene® steel plates and Red Eagle bands. We also package High-Performance Rebuilding Kits.
Our Red Eagle line has a unique dual saturation, which imparts high friction properties and high heat resistance.

Red Eagle Friction

Clutches fail in High-Performance applications due to excessive heat. Our specially designed original Red Eagle clutches withstand higher temperatures than any other clutch available. Our original material is designed to limit the amount of "slip" by providing a shorter lock-up time, generating less heat.

Our proprietary process starts with the friction paper saturated in a phenolic resin, cured, and then saturated a second time in a silicate. The silicate imparts high heat resistance.

Red Eagle clutches:

  • Are designed with a softer, more resilient base paper.
  • Assure less wear against opposing steel plates.
  • Reduce the incidence of steel plates burning and warping.

The original Red Eagle clutches increased surface area provides:

  • Increased surface area for increased holding
  • Increased surface area for increased heat absorption
  • Increased surface area for shorter lock-up time - decreasing "slippage"

Red Eagle clutches are also designed to dissipate oil without the necessity of an oil groove.

Kolene Steel

Kolene® is a salt bath nitriding process. In generic terms, it is a thermochemical diffusion process, whereby ferrous parts are processed in molten salt with a specific nitrogen potential. In plain English, it provides a surface treatment that enhances wear and fatigue resistance from 200% to 500%.

Kolene plates offer higher heat resistant and increased lubricity.

Kolene is a registered trademark of Kolene Corporation.